To texture the washer, I have coated it with an adhesive (PVA, Matt Media, Latex Paint,
or specialty Base Paste, can be used). Once well coated I pour a small mound of very
fine sand I collected from a local inland sand dune.
High winds and low rainfall make these a common feature in my area. The wind blown
sand and left over volcanic ash form an almost concrete
like mixture. This I use to represent soil.
Now let us move on to finishing the texturing of the base. My philosophy is to create
multiple layers of texture and color to simulate the soil and plant litter of the jungle
floor. As many jungle are also frequented by heavy rain fall, often running water strips
away the soil leaving exposed the typically poor sub soil. To model this I start with
patches of sand. Using some slightly watered down white
glue (PVA) with a drop of wetting agent added (dish soap) I make random patches across
the base. The base is then covered in a layer of builder's sand.
This is much courser then that used to originally coat the base. The latest addition is
allowed to dry and the excess poured off.
The difference between the textures of the two sands
being used are clear from this photo. The builder's sand looking like small stones on top
of the fine wind blown sand looking like soil.
You may click on the following to return to the Master Sand page.
You may click on the following to return to the Master Materials page.
You may click on the following to return to the Master Terrain page.
You may click on the following to return to the Victorian Science Fiction page.
I hope to be able to add more latter.
Thank you for looking:
DyeHard
To head to my Home go to DyeHard's Home Page.
|Home
|What's New
|VSF
|My Figure Painting|
|LINKA
|Models
|E-mail|
This work is licensed under a Creative Commons License.